Curve (K Radius) 7 ¼ gauge Portable Jubilee Track Panel
Curve (K Radius) 7 ¼ gauge Portable Jubilee Track Panel 1.5 section (formerly I radius). Our (K) radius curve is nearly half the radius of our (A) curve. The (K) curve allows sharper turns, ideal for the smaller garden and similar confined spaces. This new design is derived directly from our original track panels, which have been proven to be of a popular design which easily slots together, meaning an entire railway can be built in just minutes.
Full Description
Introduction to MRW Jubilee Track
Dispatch & Delivery
Return & Refunds
Terms
For product technical drawings head over to our Technical tab.
Curve (K Radius) 7 ¼ gauge Portable Jubilee Track Panel 1.5 section (formerly I radius).
9.4M [30.9ft] radius curve
Angle of curve: 8.4 degrees {available}
Angle of curve: 2.8 degrees {available via quote}
Total Length: 1.61m
Length with joiners removed: 1.40m
Weight: 6.9kg (approx)
Rail material: Hollow box steel (25x25x2mm)
Sleepers: Solid recycled plastic
Our (K) radius curve is nearly half the radius of our (A) curve. The (K) curve allows sharper turns, ideal for the smaller garden and similar confined spaces. This new design is derived directly from our original track panels, which have been proven to be of a popular design which easily slots together, meaning an entire railway can be built in just minutes.
Complete circle / 360 degree loop requires:
[ 42 x 8.4 degree sections ] + [ 2 x 2.8 degree sections ]
U Bend requires / 180 degree turn:
[ 21 x 8.4 degree sections ] + [ 1 x 2.8 degree sections ]
Right angle requires / 90 degree turn:
[ 10 x 8.4 degree sections ] + [ 2 x 2.8 degree sections ]
Please note there is an approximately 1 week lead time on this product from payment till dispatch. This listing is for a single track section, select the number of sections you require from the drop down menu, or contact us for large orders.
Track sections may come with joiners removed to keep down postage costs. To attach these you will simply need a 10mm spanner and 4mm allen key are needed to assemble the joiner to the rail. This is only required to be done on first installation the joiner may remain with the rail throughout use.
A standard track section weighs 6.9kg and requires careful handling to avoid injury. Personal Protective Equipment (PPE) should be used when laying or moving portable Jubilee Track, for more advice please refer to the ‘Operating Instructions for laying Jubilee Track’ the full version can be found on MRW website.
As standard all MRW Jubilee track panels are widened by 2.3mm [ 3/32" ] this allows for curves to be joined to straights. This widening is within the 7 ¼ gauge society standards and should not adversely affect running.
Assembling and packing Jubilee Track to ensure it is level
Portable Jubilee Track should be laid on a flat and level surface, packing pieces must be used wherever the ground is uneven, for a complete description of track laying including packing, please refer to the ‘Operating Instructions for laying Jubilee Track’ the full version can be found on MRW website. Jubilee Track, laid in minutes giving hours of fun.
Monitoring your Jubilee Track
We are not aware that any MRW portable Jubilee Tack has suffered a significant amount of wear and tear, however with lots of use you need to constantly monitor the track, also look for signs of rust, with particular attention required after periods of prolonged use. For more details please refer to the ‘Operating Instructions for laying Jubilee Track’ the full version can be found on MRW website. Jubilee Track, laid in minutes giving hours of fun.
Transportation & storage of portable track
Care should be taken when transporting, stacking and storing portable Jubilee Track, for more advice please refer to the ‘Operating Instructions for laying Jubilee Track’ the full version can be found on MRW website.
