Curve (A Radius) 7 ¼ gauge Portable Jubilee Track Panel
Curve (A Radius) 7 ¼ gauge Portable Jubilee Track Panel 1.5 section 15.2M [50ft] radius curve. Our (A) radius is the original curved track panel that MRW developed matches the radius of our points. The (A) curve has a 15.2m radius ideally suited to passenger carriage and allows for gentle sweeping curves for longer wheelbase locomotives. The panels join to our existing range of track and can be quickly be locked into place using a Track Panel Tie Bar.
Full Description
Introduction to MRW Jubilee Track
Dispatch & Delivery
Return & Refunds
Terms
For product technical drawings head over to our Technical tab.
Curve (A Radius) 7 ¼ gauge Portable Jubilee Track Panel 1.5 section 15.2M [50ft] radius curve.Angle of curve: 5.6 degrees
Length: 1.51m. track panel, 1.72m with Rail-Joiner
Dimensions: 388mm wide, 47mm tall
Weight: 6.8kg (approx)
Rail material: Hollow box steel (25x25x2mm)
Sleepers: Solid recycled plastic
Our ( A ) radius is the original curved track panel that MRW developed matches the radius of our points. The ( A ) curve has a 15.2m radius ideally suited to passenger carriage and allows for gentle sweeping curves for longer wheelbase locomotives. The panels join to our existing range of track and can be quickly be locked into place using a Track Panel Tie Bar.
Complete circle / 360 degree loop:
[ 64 x 5.6 degree sections ]
U Bend / 180 degree turn:
[ 32 x 5.6 degree sections ]
Right angle / 90 degree turn:
[ 16 x 5.6 degree sections ]
Please note there is an approximately 1 week lead time on this product from payment till dispatch.
This listing is for a single curve section, select the number of sections you require from the drop down menu, or contact us for large orders.
Track sections may come with joiners removed to keep down postage costs. To attach these you will simply need a 10mm spanner and 4mm allen key are needed to assemble the joiner to the rail. This is only required to be done on first installation the joiner may remain with the rail throughout use.
A standard 1.5 track section weighs 6.9kg and requires careful handling to avoid injury. Personal Protective Equipment (PPE) should be used when laying or moving portable Jubilee Track, for more advice please refer to the ‘Operating Instructions for laying Jubilee Track’ the full version can be found on MRW website.
As standard all MRW Jubilee track panels are widened by 2.3mm [ 3/32" ] this allows for curves to be joined to straights. This widening is within the 7 ¼ gauge society standards and should not adversely affect running.
Assembling and packing Jubilee Track to ensure it is level
Portable Jubilee Track should be laid on a flat and level surface, packing pieces must be used wherever the ground is uneven, for a complete description of track laying including packing, please refer to the ‘Operating Instructions for laying Jubilee Track’ the full version can be found on MRW website. Jubilee Track, laid in minutes giving hours of fun.
Monitoring your Jubilee Track
We are not aware that any MRW portable Jubilee Tack has suffered a significant amount of wear and tear, however with lots of use you need to constantly monitor the track, also look for signs of rust, with particular attention required after periods of prolonged use. For more details please refer to the ‘Operating Instructions for laying Jubilee Track’ the full version can be found on MRW website. Jubilee Track, laid in minutes giving hours of fun.
Transportation & storage of portable track
Care should be taken when transporting, stacking and storing portable Jubilee Track, for more advice please refer to the ‘Operating Instructions for laying Jubilee Track’ the full version can be found on MRW website.